Applications: Industrial pump discharge, Corrosive fluid storage, Onboard equipment monitoring, Hydraulic regulation process, Laboratory and research

　　Description: The FP110 is designed to measure static and dynamic pressure with the output characteristics substantially kept up to about 20% of the resonant frequency. The all stainless steel construction and flush diaphragm allow the sensor to be used under a wide variety of conditions and in temperatures up to 120 °C. Fitted with metallic strain gauges in a Wheatstone bridge circuit, the FP110 provides excellent temperature stability. It is available in standard ranges from 0 to 150 psi up to 0 to 7500 psi. An on-board A1 or A2 amplifier for high level output is optionally available. Consult Measurement-Specialties’ Engineering Department if the standard options do not meet your needs or should your application require a more comprehensive measurement system.

　　Features:

　　M16 Thread
　　Wide Temperature Ranges
　　Flush Diaphragm
　　High Level Tension Output Avialable
　　Accepts Wide Range of Fluids

　　典型應用: 工業泵，腐蝕液體儲藏罐，罐車監控，液壓控制，實驗室和研究

　　產品描述: FP110壓力傳感器專門用于靜態及動態壓力測量，且可以保證在20%諧振頻率范圍內具有良好的動態輸出特性。該傳感器采用不銹鋼齊平膜結構，工作溫度最高可達120℃。金屬應變片組成的惠斯通電橋使得FP110可以提供非常好的溫度穩定性。壓力測量范圍從0~150到7500psi�？蛇xA1或A2級放大輸出。同時，我們還可根據客戶需求量身定制。

　　特點:

　　M16 螺紋
　　工作溫度寬
　　齊平膜式
　　可選放大輸出
　　可測量多種液體

　　轉載請注明來源：賽斯維傳感器網（www.jsxlzzp.com）