產品中心 應用方案 技術文摘質量保證產品選型 下載中心業內動態 選型幫助 品牌介紹 產品一覽 聯系我們
- 834M1系列加速度傳感器中英文產品介紹
- 來源:賽斯維傳感器網 發表于 2014/6/27
Applications: Asset Monitoring, Impact Testing, System Wake-Up Switch, Embedded Applications, Instrumentation
Industries: Aerospace and Military, Medical, Consumer Goods, General
Description: The Model 834M1 is a low cost, board mountable triaxial accelerometer designed for high amplitude embedded shock applications. The accelerometer features a maximum current consumption of 22 micro-amps and incorporates full power and signal conditioning. The model 834M1 is available in ±2000g to ±6000g ranges and provides a flat frequency response up to greater than 6kHz. The standard model 834 offers the same envelope with a lower maximum current consumption of 4 micro-amps.
Features:
Low Cost Triaxial Piezoelectric Accelerometer
<22µA Current Consumption
±2000g to ±6000g Dynamic Range
Full Power and Signal Conditioning
Hermetically Sealed
Wide Bandwidth to >6kHz
-40° to +125°C Operating Range
Circuit Board Mountable
典型應用: 設備監控,沖擊測試,系統喚醒開關,嵌入式OEM應用,儀器儀表
行業: 航天國防, 醫療, 消費電子和家用電器, 工業控制
產品描述:
834M1是一款低成本的板載式三軸加速度,采用穩定的壓電陶瓷晶體,經過信號處理,最大功耗為22µA,適合高振幅的沖擊應用。產品量程為±2000g至±6000g,響應頻率可達6kHz。同類型的加速度傳感器834的最大功耗為4µA。
特點:
低成本三軸壓電式加速度傳感器
功耗:<22µA
動態量程:±2000g ~ ±6000g
信號處理
全密封
板載式
工作溫度范圍:-40℃ ~ +125℃
834M1加速度傳感器更多技術參數及規格書下載請瀏覽:http://www.jsxlzzp.com/sensors/540.html
北京賽斯維測控技術有限公司產品咨詢熱線:010-84775646,84775648。
- 如果本文收錄的圖片文字侵犯了您的權益,請及時與我們聯系,我們將在24內核實刪除,謝謝!