Applications: Impact & Shock Testing, Vibration & Shock Monitoring, Embedded Applications, Transportation Measurements

　　Industries: Aerospace and Military, Engine and Vehicle, General

　　Description: The Model 3255A is a signal conditioned board mountable MEMS accelerometer available in ±25g to ±500g ranges. The package can be mounted in one of two orientations, allowing the measurement axis to be either parallel or perpendicular to the mounting surface without the use of costly brackets. The accelerometer incorporates integral temperature compensation from -40°C to +100°C and offers a flat frequency response from DC to 1500Hz.

　　Features:

　　PC Board Mountable Accelerometer
　　Amplified Output
　　±25g to ±500g Dynamic Range
　　Temperature Compensated
　　Hermetically Sealed
　　-40° to +100°C Operating Range
　　5Vdc Excitation
　　DC Response, Gas Damping

　　典型應用: 碰撞和沖擊測試，振動監控，儀器儀表，運輸

　　行業: 航天國防, 發動機和機動車輛, 工業控制

　　產品描述:

　　3255A是一款經過信號處理的板載式MEMS加速度傳感器，量程從±25g到±500g。特殊的封裝允許用戶任選X軸和Y軸其中的一個方向安裝，即測量軸可以與安裝表面平行或垂直，因而不需要使用昂貴的支架進行安裝。傳感器的溫度補償范圍為-40℃至100℃，頻率響應范圍從靜態到1500Hz。

　　特點:

　　PC板載式加速度傳感器
　　放大輸出
　　±25g ~ ±500g動態量程
　　溫度補償
　　全密封
　　工作溫度：-40℃~100℃
　　5Vdc激勵
　　氣態阻尼，靜態響應

　　3255A加速度傳感器更多技術參數及規格書下載請瀏覽：http://www.jsxlzzp.com/sensors/93.html

　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。