Applications: On-board vehicle equipment, Test bench equipment, Robotics and effectors, Laboratory and research

　　Industries: Engine and Vehicle

　　Description: The FN7080 is installed in place of the original gear knob on the gear stick of a vehicle and will measure the force required to change gear. Force is measured either in two or three directions. An adapter coupled with an interface collar allows a simple and rapid fitting of the FN7080 to the majority of vehicles. The sensor’s geometry and size mean that it is as ergonomic as the original gear knob. The ease of mounting enables the FN7080 to be used on a vehicle or on a test bench. An optional version provides direct high level output and makes the FN7080 a favorite among European car builders. Measurement Specialties, Inc. have many years of experience as a designer and manufacturer of sensing solutions to the automotive industry and can supply standard or custom sensors for specific uses and testing environments. Consult Measurement Specialties, Inc. Engineering Department for a custom solution to your application.

　　Features:

　　2and 3 axes measurements
　　Fits most gear sticks
　　Compact and ergonomic design
　　Optional high level output
　　Exists in many optional designs

　　典型應用: 車載測試設備，測試臺，機械人，實驗室研究

　　行業: 發動機和機動車輛

　　產品描述:
　
　　FN7080安裝在檔桿把手的位置，用于測量換檔時所需要的兩軸或三軸力。安裝環和連接器使得FN7080適用于大部分車輛的變速桿，安裝簡單。傳感器的外形和尺寸與一般檔桿把手相同，所以在測試時可以代替檔桿把手。安裝的靈活性使得傳感器可以用于測試臺和車載測試�？蛻暨�可以選擇放大輸出的型號，因此FN7080深受歐洲各個汽車制造廠商的歡迎。作為擁有多年經驗的傳感器設計和制造商，MEAS常常與客戶合作，按要求定制適合特殊用途和測試環境的傳感器。同時，我們也根據客戶需要提供成套系統。配套元件（傳感器，電源，放大器和數顯系統）配置統一，經過校正，可供客戶立即使用。

　　特點:

　　2軸或3軸力測量
　　適合大部分變速桿
　　結構緊湊
　　可選放大輸出
　　多種設計可選

　　FN7080力傳感器更多技術參數及規格書下載請瀏覽：http://www.jsxlzzp.com/sensors/574.html
　　
　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。